Vibromatic 3000

Versatile and fully automatic machine for vibration-compaction production with direct demoulding of a great variety of concrete products. Depending on the different models, the machine can manufacture products of diameter from 300 mm to 2500 mm, with a height from 250 mm up to 3000 mm in single, double, or triple production mode, with the possibility of carrying out mixed-size productions.


Watch the Video

Advantages

High output
Flexibility (a wide range of products can be produced)
Less personnel required
High product quality guaranteed by the automatic electronic adjustment of vibration (with vibrators inside the mould) and concrete feeding
Excellent independent management for mixed-size productions
Very fast mould changes (the reduced mould change times allow the mould to be changed on the same day, for a possible 2nd work shift), without needing to adjust the mould after the change
Full control of the machine through Vicom PC system, with the possibility of remote production management (industry 4.0)

Technical Characteristics

The machine can be equipped with the fast and easy-to-use quick hydraulic mould change system, making daily quick mould changes possible in less than 1.5 hours (in addition, the adjustment of cores, outer moulds, and pressing heads after production change is no longer necessary).

A system is present for managing the precise height of the products within a given tolerance. The concrete feeding is completely automatic: the feeding belts, operated independently, place the concrete on the centre point of each mould, always measuring the correct quantity: this feature is crucial not only to maximise filling speed and compaction quality but also to facilitate multiple productions of two or three products of different diameters.

Other features make the Vibromatic 3000 an extremely versatile and functional machine, such as the smoothing system for the inner surface of the pipe, the mechanical and electronic adjustment of the vibrators through an inverter, and easy access to the bucket for inspection and cleaning operations.

The system can be integrated with automatic base pallets feeding (carried out at the back) and automatic ejection of the products at the end of the cycle and/or with base pallets cleaning and oiling, insertion of joints, and automatic overhead handling.

These opportunities allow further acceleration of the production cycle, reducing the personnel required. The management and general control of the machine are performed using the Vicom PC system, with machine status and fault control synoptics, with remote assistance modules, and the possibility of remote production management (industry 4.0).

Manufacturable Products

Circular pipes
Flat base circular pipes
Not reinforced pipes
Pipes reinforced with rigid reinforcements
Fibre reinforced pipes
Draining pipes
Spigot-spigot junction pipes
Box culverts and oval pipes
Manhole bases
Risers and cones
Monolit cones for manhole
Flat cover
Grade rings for manholes
Pipes with derivations
Manholes for road drainage
Drainage channels
Jacking pipes
Special products in general, to be manufactured to customer specifications, with any type of joint

Technical Sheet

MACHINE PIPES
max diameter
BOX CULVERTS
max diameter
MANHOLE CONES
max diameter
3-CHAMBER RINGS

MANHOLE RINGS
max diameter

MANHOLE BASES
max diameter
Vibromatic 30/120 120 cm 120 cm X 120 cm 120 cm 120 cm 120 cm
Vibromatic 30/120 G 120 cm 140 cm X 140 cm
100 cm X 150 cm
150 cm 150 cm 150 cm
VIBROMATIC 30/160 160 cm 150 cm X 150 cm
120 cm X 170 cm
160 cm 160 cm 150 cm
VIBROMATIC 30/220 220 cm 200 cm X 200 cm
170 cm X 220 cm
220 cm 220 cm 150 cm
Pipe quantity per cycle
MACHINE D 300 D 400 D 500 D 600 D 700 D 800 D 900 D 1000 D 1200 D 1400 D 1600 D 1800 D 2000 D 2200
Vibromatic 30/120N 2 2 2 2 1 1 1 1 1
Vibromatic 30/120G 2 2 2 2 1 1 1 1 1
Vibromatic 30/120T 3 3 3 2 2 2 1 1 1
Vibromatic 30/160N 2 2 2 2 1 1 1 1 1 1 1
Vibromatic 30/160T 3 3 3 2 2 2 1 1 1 1 1
Vibromatic 30/220N 2 2 2 2 1 1 1 1 1 1 1 1 1 1
Vibromatic 30/220T 3 3 3 2 2 2 1 1 1 1 1 1 1 1