Vibrotubi develop 3 June 2022


Semi-automatic machine for vibration-compaction production of products with a height from 250 mm to 3000 mm, demoulding with overhead crane, particularly suitable for large products.

Semi-automatic machine for vibration-compaction production with direct demoulding through overhead cranes of a great variety of concrete products; it is particularly suitable for manufacturing large products. Depending on the different models, the machine can manufacture products of diameters from 300 mm to 3600 mm or up to the size of 3000 mm x 5000 mm if box culverts, with a variable height from 250 mm up to 3000 mm in single production mode (multiple production modes are also available on request) .
The machine can be equipped with quick hydraulic change of the internal moulds. A quick and easy-to-use system that makes fast daily mould changes possible in a very short time (in addition, the adjustment of cores and pressing heads after production change is no longer necessary).

Concrete feeding can be manual (with a standard conveyor belt controlled by the operator using a joystick), semi-automatic (with a conveyor belt fitted with a rotating distributor), or automatic (with a conveyor belt fitted with a rotating secondary belt controlled through a PC, with software to feed the mould following the outer perimeter. The latter solution is particularly effective for manufacturing box culverts and special products).

Other features that make Vibrotubi an extremely functional system are the mechanical and electronic adjustment of the vibrators through an inverter and the electronic adjustment of the feeding speed of the conveyor belt (where included).

The management and general control of the machine can, on request, be performed through the Vicom PC system, with machine status and fault control synoptics, and complete with remote assistance modules.

Products that can be produced:

  • Circular pipes
  • Flat base circular pipes
  • Not reinforced pipes
  • Pipes reinforced with rigid reinforcements
  • Fibre reinforced pipes
  • Draining pipes
  • Spigot-spigot junction pipes
  • Box culverts and oval pipes
  • Jacking pipes
  • Manhole bases
  • Risers and cones
  • Monolit cones for manhole
  • Flat cover
  • Grade rings for manholes
  • Pipes with derivations
  • Manholes for road drainage
  • Drainage channels
  • Special products in general, to be manufactured to customer specifications, with any type of joint
  • Cost-effectiveness
  • Flexibility (a wide range of products can be manufactured; the machine is ideal for the production of both large-size products, owing to its characteristics, and medium-small products, owing to its cost-effectiveness)
  • High product quality is guaranteed by the automatic electronic adjustment of vibration (with a vibrator inside the mould) and concrete feeding
  • Very fast inner mould changes (the reduced mould change times allow the mould to be changed on the same day, for a possible 2nd work shift), without needing to adjust the mould after the change
  • Ease of use and maintenance
  • The Vicom PC system allows for full control of the machine, with the possibility of remote production management

diameter from cm to cm
max dimensions
max diameter
max diameter
3-chamber tanks septic tanks
max diameter
manhole base tilting system
max diameter
30/120 – H 200-250-30030 cm – 120 cm100 cm x 100 cm120 cm120 cm
30/150 – H 200-250-30030 cm – 150 cm120 cm x 120 cm150 cm150 cm
30/200 – H 200-250-30030 cm – 200 cm150 cm X 200 cm200 cm CONCENTRICO200 cm
30/250 – H 200-250-30030 cm – 250 cm300 cm X 170 cm250 cm CONCENTRICO250 cm
30/300 – H 200-250-30030 cm – 300 cm400 cm X 220 cm300 cm CONCENTRICO300 cm
30/300 M – H 200-250-30030 cm – 300 cm400 cm X 250 cm320 cm CONCENTRICO320 cm
30/360 – H 200-250-30030 cm – 360 cm300 cm X 500 cm360 cm CONCENTRICO360 cm


Le nostre realizzazioni